Octel 100 Configuration Note
(7036)
Avaya Definity G3 with Vectoring
C o n f i d e n t i a l
P a g e
13
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the
disclaimer on page 1
Avaya Inc. PROPRIETARY. Use pursuant to Company instructions.
Avaya
C o m m u n i c a t i o n s A p p l i c a t i o n s
G r o u p
Use this section to configure the G3V4 and G3V5.
G3V4 and G3V5
Page 1 of 1
VECTOR DIRECTORY NUMBER
Extension: 5030
Name: VOICEMAIL
Allow VDN Override? N
COR: 1
TN: 1
Vector Number: 1
Measured: none
Acceptable Service Level (sec):
VDN of Origin Annc. Extension:
1
st
Skill:
2
nd
Skill:
3
rd
Skill:
Return Destination:
The VDN is now the Octel 100 Access Number. Subscribers dial it to
retrieve their messages and use it as the call coverage target.
Place the VDN created above in the coverage path of each subscriber. The
specific number of the VDN is entered (e.g., v5030).
NOTES: Do not change vectors while calls are being processed;
problems may be experienced with calls already being processed.
For more information on commands and how VDNs should be
administered, refer to Definity Communications System Generic 3i
Implementation Manual 555-204-655 (for the Generic 3r the number is
555-230-651).
CREATE THE MAIN SYSTEM ACCESS NUMBER (VDN)
Using the ADD VDN command, create a Vector Directory Number (e.g.
v5030) configured as follows:
Assign All integrated Octel 100 ports as part of the call vector.
If you desired, you may assign to the
Octel 100
VDN the name
VOICEMAIL. Enter the entire name in capital letters with no spaces. An
extension number may follow the name using a space to separate the
extension number from the name. For example, 'VOICEMAIL' and
'VOICEMAIL 5030' is acceptable. '5030 VOICEMAIL' and 'VOICE
MAIL' is not acceptable. If the extension number is not included then the
caller will receive the general auto attendant greeting.
In addition, it is recommended that each Octel 100 port be assigned the
name 'VOICEMAIL' as outlined above.
Assign the VDN as the coverage
path for each subscriber