Octel 100 Configuration Note
(7036)
Avaya Definity G3 with Vectoring
C o n f i d e n t i a l
P a g e
12
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the
disclaimer on page 1
Avaya Inc. PROPRIETARY. Use pursuant to Company instructions.
Avaya
C o m m u n i c a t i o n s A p p l i c a t i o n s
G r o u p
Note: This only applies to performing port to port checks; day-to-day
operation of the Octel 100 is not affected.
Use this section to configure the G3V2, and G3V3.
G3V2, and G3V3
Add vector 1
Page 1 of 1
CALL VECTOR FORM
Vector number: 1
1
queue to main split 35
priority m
2
Goto step 5 if calls queued in split 35 => 10 pri m
3
wait 0 seconds
hearing FDBK ringback
4
goto step 1
if unconditionally
5
route to number xxxx
if unconditionally
A maximum of 32 steps is allowed per call vector. The number xxxx is a
secondary answer point (e.g., attendant console or answering point).
Page 1 of 1
VECTOR DIRECTORY NUMBER FORM
Extension: 5030
NAME: VOICEMAIL 5030
Allow VDN override? n
COR: 1
Vector Number: 1
Measured: none
The VDN is now the Octel 100 Access Number. Subscribers dial it to
retrieve their messages and use it as the call coverage target.
Place the VDN created above in the coverage path of each subscriber. The
specific number of the VDN is entered (e.g., v5030).
NOTES: Do not change vectors while calls are being processed;
problems may be experienced with calls already being processed.
For more information on commands and how VDNs should be
administered, refer to Definity Communications System Generic 3i
Implementation Manual 555-204-655 (for the Generic 3r the number is
555-230-651).
Assign the VDN as the coverage
path for each subscriber