Avaya DEFINITY 4606 User Manual Download Page 50 | Manualshive

Page: 50 / 60

Avaya DEFINITY 4606 User Manual Download Page 50

7-2

Issue 1 July 2001

Feedback (Handset)
Tones

Meaning

Busy --- --- ---

Low-pitched, rapid tone (repeated 60 times per minute),
signifying the number dialed is in use.

Call Waiting Ringback
Tone ---_

A ringback tone with lower-pitched signal at the end;
indicates the extension called is busy and the called party
has been given a call waiting tone. If you hear this tone,
you may want to activate Automatic Callback.

Confirmation -- -- --

Three short tone bursts; indicates a feature activation or
cancellation has been accepted.

Coverage -

One short tone burst; indicates your call will be sent to
another extension to be answered by a covering user.

Dial ---------

Continuous tone indicating dialing can begin.

Intercept/Time-out

-_-_-_-

Alternating high and low tone indicating either a dialing
error, denial of a requested service or failure to dial within
a preset interval (usually 10 seconds) after lifting the
handset or dialing the previous digit

Recall Dial - - - -----------

Three shorts tone bursts followed by a steady dial tone to
indicate a feature request has been accepted and dialing
can start.

Reorder -- -- -- -- -- --

Fast busy tone repeated every half-second to indicate all
phone trunk lines are busy.

Ringback ---- ---- ---- ----

Low-pitched tone repeated 15 times a minute to indicate
the number dialed is ringing.

«
...
48
49
50
51
52
...
»

Summary of Contents for DEFINITY 4606





























































Reviews:

No comments