manualshive.com logo in svg

Avaya DEFINITY 4606, User Manual, Page: 43 / 60

Share
Download
Avaya DEFINITY 4606 User Manual Download Page 43

Stored Number (View)

Issue  1   July 2001

5-17

Stored Number (View)

The Stored Number feature lets you display:

■

The numbers stored in Abbreviated Dialing (AD) locations

 

■

The number you last dialed 

Viewing either the last number dialed or 
a number stored on an AD button

 

1. If one has been programmed by your System Administrator, press the 

View Line/Feature button. 

2. To view the last number dialed, press 

, 

or

To view the number stored on an Abbreviated Dialing button, press the 
applicable AD Line/Feature button. 

The associated telephone number displays. 

3. To return to call handling mode, press Exit or, to see another 

feature/number, repeat this procedure from Step 2. 

Timer 

The Timer (display) feature lets you measure elapsed time. 

Viewing elapsed time (hours, minutes, seconds) 

1. Press the Line/Feature button your System Administrator has programmed 

for the Timer feature. 

The elapsed time displays.

2. To stop the Timer and clear the display, press the button your System 

Administrator has programmed for the Timer feature again.

The time elapsed since initiating the Timer displays for about three 
seconds, then disappears.

Summary of Contents for DEFINITY 4606





























































Reviews:

No comments