Avaya DEFINITY 4606 User Manual Download Page 37 | Manualshive

Page: 37 / 60

Avaya DEFINITY 4606 User Manual Download Page 37

Pause (During Abbreviated Dialing)

Issue 1 July 2001

5-11

Leaving a message after dialing an extension
(in response to a busy or coverage tone, no answer
or Hold status)

1. If your System Administrator has programmed one of the Line/Feature

buttons to represent Leave Word Calling, press that button to initiate leave
word calling,

The Speaker indicator light activates.

2. Hang up.

The Message Indicator light at the extension called goes on.

Leaving a message without ringing an extension

1. If your System Administrator has programmed one of the Line/Feature

buttons to represent Leave Word Calling, press that button to initiate leave
word calling,

The Speaker indicator light activates.

2. Dial the extension.

The Message Indicator light at the extension called goes on.

3. Hang up.

Canceling a Leave Word Calling message

You cannot cancel a LWC message left for an AUDIX subscriber.

1. If your System Administrator has programmed one of the Line/Feature

buttons to represent Cancel Leave Word Calling, press that button. The
phone can be either on- or off-hook.

2. Dial the extension at which you left the message.

You hear a confirmation tone.

3. Hang up.

Pause (During Abbreviated Dialing)

The Pause feature allows a pause to be programmed into an Abbreviated Dialing
entry when setting up an abbreviated dialing number or list.

«
...
35
36
37
38
39
...
»

Summary of Contents for DEFINITY 4606





























































Reviews:

No comments