manualshive.com logo in svg

Avaya DEFINITY 4606, User Manual, Page: 32 / 60

Share
Download
Avaya DEFINITY 4606 User Manual Download Page 32

5-6

Issue  1   July 2001

Canceling Call Forwarding

1. If your System Administrator has programmed one of the Line/Feature 

buttons to represent Call Forwarding Cancel, press that button, 

or 

Dial the Call Forward Cancel Access Code with the phone off-hook.

The Line indicator light goes off and you hear a confirmation tone; your 
calls will now ring at your phone. 

Call Park 

The Call Park feature lets you place a call on hold at your telephone for retrieval at 
any extension. 

Parking a call at your extension 

If your System Administrator has programmed one of the Line/Feature 
buttons to represent Call Park, press that button to initiate Call Park. 

The call is parked at your extension.

Retrieving a parked call from another extension 

1. With the handset off-hook, dial the Answer Back Access Code.

2. Dial the extension where you parked the call (usually your own extension). 

If an intercept tone sounds, the parked call has been disconnected or 
retrieved by someone else.

Summary of Contents for DEFINITY 4606





























































Reviews:

No comments