Faceplate feature
Description
Network and drive activity
LEDs (labeled as E, C, I,
and S)
The E and C LEDs indicate the presence of network activity for
both the ELAN and CLAN interfaces (respectively). When they
are lit, they indicate that the interfaces are properly attached to
their respective hubs. When the LEDs are blinking, there is
network activity.
When the I and S LEDs are lit, it means that the IDE hard drive
and SCSI device are being accessed.
Reset button
The reset button allows you to manually restart the 201i server
without disconnecting it from the backplane.
Important:
Before you press the reset button, you must shut down the
operating system. Press the reset button while the operating
system is running only when you cannot shut down the
operating system normally.
Environmental specifications
Temperatures
Recommended temperature
15°C (59°F) to 30°C (86°F)
Absolute temperature
10°C (50°F) to 45°C (113°F)
Long-term storage temperature
-20°C (-4°F) to 60°C (140°F)
Short-term storage temperature
-40°C (-40°F) to 70°C (158°F) (less than 72 hours)
Change rate temperature
Less than 1°C (34°F) per 3 minutes
Relative humidity
Recommended relative humidity
(RH)
20% to 55% RH (noncondensing)
Absolute RH
20% to 80% RH (noncondensing)
Long-term storage RH
5% to 95% RH [at -40°C (-40°F) to 70°C (158°F)
respectively] (noncondensing)
About the 201i server
18 Avaya CallPilot
®
201i Server Hardware Installation
December 2010