background image

14

Orderable Cards and Equipment

The following cards and equipment are orderable.

 You can order additional designation cards in quantities of 25 cards 

per package. Notepads can also be ordered in quantities of 25 per 
package. Use the following comcodes when you place your order.

– 25 sheets of designation cards (8-1/2” x 11”)

Comcode 847991650

– 25 sheets of designation cards (A4-size)

Comcode 848020749

– 25 sheets of Notepads with 9 Notepads per sheet (8-1/2” x 11”)

Comcode 108562570

– 25 sheets of Notepads with 9 Notepads per sheet ((A4-size)

Comcode 108562588

– Designation card covers can be ordered in quantities of 25 per 

package 
Comcode 108272402

– Notepad covers can be ordered in quantities of 25 per package

Comcode 108573304

You may also order an optional handset D-Kit, so that you can 
connect a K-type handset to the telephone. This kit includes the 
handset and a handset cord, and can be ordered with one of the 
following numbers: (PEC 31293 & 31293A, 
Comcode 407904309).

Note:  

This handset is the only handset that can be used with the 

CALLMASTER V telephone.

A tray with five quick reference cards can be inserted in the grooves 
located under the base of the CALLMASTER V telephone. The tray 
and the cards are ordered separately with the following numbers:
the tray = PEC 33111, Comcode 108272584; 
the cards = Comcode 108032178).

An XM24 Expansion Module can be connected to the 
CALLMASTER V to extend the number of available call appearance 
and/or feature buttons. The XM24 module can be ordered with the 
following numbers: 
A gray XM24 = PEC 33071/A, Comcode 108544511

Summary of Contents for CALLMASTER V



















Reviews: