background image

- 3 -

User Manual

This product cannot be used in outdoor envrionments. Not intended for use by children, 
persons with reduced physical, sensory or mental capabilities or lack of experience 
and knowledge.

• The installation, repair or maintenance of this ice machine must be carried out by professional and

 

qualified personnel. Electric shock, fire, personal injury may result from incorrect operation.

• After the ice machine is delivered, please keep the machine upright for at least 24 hours to have the

 

refrigerant be fully precipitated before startup. Otherwise the compressor may be damaged.

• When handling, keep the cabinet upright with the inclination not exceeding 45 degrees. Do not invert the

 

machine or lay it horizontally.

• This ice machine should not be placed in wet or easily splashed areas.
• The grounding of this ice machine cannot be connected to a gas pipe, water pipe, telephone line or

 

lightning rods, etc.

• There are rotating components in this ice machine. Do not insert slim objects into ventilation or exhaust

 

ports, or serious mechanical damage and injury may occur.

• Do not store volatile or flammable substances in this ice machine or it may result in 

an 

explosion or fire.

• Do not store any sundries or freeze any food in the storage bin. Keep the ice scoop clean.
• The ice machine must be placed on a floor sufficient enough to support its weight. 

An i

nsufficient base 

may

 

cause the equipment to fall over and cause injury.

• There should be sufficient ventilation space around the ice machine. See page 5 for

clearance requirements.

• Only the power supply specified on the machine nameplate can be used with this ice machine.
• This ice machine cannot be connected to hot water.
• Outlet for this ice maker must be reliably grounded with leakage protection.
• The ice machine must be disconnected from power before manual cleaning, repairing and maintenance.
• Before cleaning, repairing and maintenance, the remaining ice in the ice bin should be removed from the

 

ice machine to avoid contamination to ice.

• Do not splash water directly onto the surface of the ice machine during the cleaning process; otherwise it

 

may cause short circuit, leakage or other faults.

• Flammable foaming agent is used during the foaming process. The ice maker should be disposed of and

 

recycled by qualified personnel and institutions.

• The ice machine should be properly managed to ensure that children will not play with the machine.
• When the ice machine malfunctions, turn off the power and contact professional personnel

 to be repaired.

Summary of Contents for 194UCF120A






















Reviews: