- 13 -
User Manual
Clean Function
NOTE: Please empty the bin of ice in advance.
NOTE: Please clean and sanitize the bin and do a complete rinsing.
NOTE: Please clean and sanitize the ice sliding board, water distribution line,
water supply line, water pump, then do a complete rinsing.
• Turn on the ice maker; push “clean” button for 3 seconds, the ice maker will begin the
cleaning process. Put in
the
proper amount of cleaning solution manually into the water
trough
followed by the clean and sanitizing process instruction.
• Push
the
“clean” button. The ice maker will do auto clean for about 15 minutes.
Please spray
the evaporator with the cleaning solution in the meantime to ensure a complete clean. When
finished, the
LED
display will flash "Clean" slowly again.
• Put in the proper amount of sanitizing solution manually into the water trough followed by the
clean and sanitizing process instruction. Push the “clean” button again, the ice maker will do
auto sanitizing for about 15 minutes. Please spray the evaporator with the sanitizing solution
in the meantime to ensure complete
sanitization.
When finished, the ice maker will go into the
rinsing process, this process will take about 5 minutes, and do 5 rinsing cycles. Refer to your
cleaner and sanitizer for proper mixing & coding instructions.
• The ice maker will go back to making ice as soon as the cleaning process ends.
• Please throw away the next 5 batches of ice in case of residual cleaner.
Manual Cleaning & Sanitizing
1. Remove all ice from
the ice bin to avoid
contamination.
3. Remove the water curtain.
2. Empty the water from
the tank.
Cleaning Instructions
Note: Cut off the power