- 10 -
User Manual
4.
Cleaning: During the normal operation, hold the cleaning button for 3 seconds to enter the
cleaning process. During the entire cleaning process, cleaning agents and disinfectants need
to be put into the water trough. When the cleaning process is finished, the ice maker will go to
the ice making process.
Note: All cleaning and sanitizing chemicals used must be nickel safe
5.
ON/OFF: Press this button to switch the machine OFF/ON.
6.
Please open and close the storage bin door gently. Do not slam the door. Keep door closed
when not
removing
ice.
7.
If the ice maker is not in use for a long time, it should be energized and run for 2 to 4 hours
every 2 months.
Other Special Protection - Shutdown
• If the ice machine has not detected ice harvest in three cycles, it will shut down for safety
and
protection. The ice maker needs to be checked.
• If the ice machine detects that the ambient temperature is too high it will stop for safety
and
protection.
• The fault code and its comments are displayed as follows:
Code
E01
E02
E03
E04
E05
E06
E07
E08
E09
E10
E11
E12
Sliding board failure
Ice making overtime
Overtime of ice making
High temperature
Water shortage
High pressure
Condensation sensor open circuit
Condensation sensor short circuit
Evaporator sensor open circuit
Evaporator sensor short circuit fault
Refrigeration system failure
Water level control fault
Protective shutdown
Protective shutdown
Protective shutdown
Protective shutdown
Protective shutdown
Protective shutdown
Does not shutdown, Error LED light on every 5 seconds
Does not shutdown, Error LED light on every 5 seconds
Does not shutdown
Does not shutdown
Protective shutdown
Protective shutdown
Comments
Machine Action
