AVANT A36795, Operator'S Manual For Attachment

Page: 19 / 30

19 (30)
.
6.2.2 Correct operating position
1. Set the blade on the ground and tilt it into upright position by using the boom control lever of
the loader:

Lower the plow on the ground.

Tilt of the quick coupling plate to vertical
position.
If necessary, adjust the support legs so that
also they touch the ground lightly together
with the edge of the plow. See page
22.

Depending on operating conditions, you may
try to tilt the blade a little front or back when
removing ice, for example.
2. Correct height setting of the loader boom: Set the floating attachment bracket to its middle
position:

Set the height of the loader boom so that the
floating attachment bracket will be set to its
middle position as shown in adjacent figures.

The coupling plate brackets should be in level
with the markers to indicate correct height
setting.

If necessary, tilt the attachment again to keep it
upright.