AVANT A36795, Operator'S Manual For Attachment

Page: 22 / 30

22 (30)
.
6.4 Hinged lower blade sections
To reduce the possibility of a sudden stop in case of hitting an
obstacle, the plow is equipped with a spring release mechanism.
The lower blade sections are held by compression springs which
allows them to tilt backwards.
The lower sections could move slightly during normal use. If the
movement is too easy, tighten or replace the springs. The
operation of the blade spring release system must not be blocked
and the springs must not be tensioned excessively.
In addition to the spring release system, the plow is equipped with pressure relief valves which will allow the
blade sections to yield backwards in hard collisions with obstacles, if the blade sections are not in their
extreme rear positions. Changing the adjustment of the system is prohibited, contact authorised service point
if encountering problems with the system.
6.5 Support legs
The standard skid shoes improve
manoeuvrability while plow and help to achieve
even work result.
Both skids should be adjusted to touch the
ground lightly when the plow is in correct
operating position.
Adjust both skid shoes to same height.