AVANT A36795, Operator'S Manual For Attachment

Page: 8 / 30

8 (30)

Pay attention to the surroundings and any other persons and machines moving in the
vicinity. Pay attention to the contours of the terrain and other hazards, such as
branches and trees that can reach to the driver's area, loose rocks, and slippery
surfaces.

Make sure to use only an attachment that is in good condition. Do not modify the
attachment in any way that could affect its safety.

Use the attachment only for its intended purpose. Other use may create unnecessary
safety risks, and the equipment may get damaged.

Make sure that the loader is equipped with necessary safety components, and that
they are in working condition. Seat belt must be used. If there are specific hazards
related to the operating area, use appropriate safety equipment.

Shut down the loader engine and release any residual pressure before adjustments
or maintenance work.

Also read the safety instructions and correct use of the loader from the operator's
manual of the loader.
Remember to wear proper protective clothing:

The noise level at the driver's seat may exceed 85 dB(A). Wear hearing
protection while working with the loader.

Wear protective gloves.

Wear safety boots whenever working with the loader.

Wear safety glasses when handling hydraulic components.
. ..
Safe stopping of the attachment, before going near the attachment:
WARNING: Always stop the attachment following safe stopping procedure
before leaving the driver's seat. Safe stopping procedure prevents all
unintentional movements of the attachment. Note that the loader boom can move
down even if the engine of the loader is turned off. Safe stopping procedure:

Lower the boom and the attachment on the ground.

Shut down the loader engine and lock the parking brake.

Release residual pressure from the hydraulic system; move all hydraulic control
levers to their extreme positions a couple of times.

Prevent starting of the machine, remove ignition key.