AVANT A36795, Operator'S Manual For Attachment

Page: 15 / 30

15 (30)
.
5.1 Electric connection
To operate the electric selection valve on the Snow plow, the electric harness must be connected to the
loader.
There are two options for the electric connection:
1.

The cable harness A34731, delivered with the attachment and
equipped with a 2-position switch, is connected to the 12 V outlet
near the driver's seat on the loader. Keep the switch in the cab so
that it is easily accessible, but will not be used inadvertently.
2.

Alternatively, the electric function can be controlled with the
attachment control switch pack, which is optional equipment for the
loader. In this case, the separate cable with the switch is not
needed, and the plug of the attachment can be connected directly
to the socket on the loader boom.

Electric socket is integrated in the multi connector on all
loaders equipped with attachment control switch pack from
January 1
st 2016.

On loaders manufactured 2015 or before, there is a separate
socket next to the multi connector.

The electric feature on the Snow plow is controlled with the switch
number 1. Other switches are not in use with this attachment.
Route the selected cable in a way that it cannot get stuck or pinched, or stretch when the equipment moves.
With the help of the attachment control switch pack available for the loader, the attachment control switches
are easily accessible at the end of the boom control lever. Instructions about the power outlet of the loader
can be found in the operator’s manual of the loader.