background image

6

755/760i

Warranty

Avant 755/760i warranty

This warranty specifically applies to the AVANT 755/760i loader only and not to any attachments used with this product.
Any repairs or modifications performed without the prior authorisation of Avant Tecno Oy will cancel this warranty.
During the first two years of operation or first 1000 hours (whichever is the soonest) Avant Tecno Oy warrants to 
replace any part or repair any defect which may occur, subject to the terms detailed below: 
1)  The product has received regular maintenance in accordance with schedules given by the manufacturer.
2)  Any damage caused by operation in a negligent manner or exceeding the approved specifications detailed in this 

manual is excluded.

3)  Avant Tecno Oy accepts no responsibility for interruption to working or any other consequential losses resulting 

from any failure of the product.

4)  Only Avant Tecno Oy approved replacement or original quality parts shall be used during routine maintenance.
5)  Any damage caused by the use of incorrect fuel, lubricants, cooling liquid or cleaning solvents is excluded.
6)  The Avant Warranty excludes any consumable parts (e.g. tyres, batteries, filters, belts etc.) except where it can be 

clearly shown that these parts were defective on original supply.

7)  Any damage caused resulting from the use of attachments not approved for use with this product is excluded.
8)  In the event a fault occurs which is attributable to manufacturing or assembly defect you should arrange to return 

your AVANT to your authorised dealer for repair. Travel and freight costs are excluded.

Summary of Contents for 755









































Reviews: