27
755/760i
Operating instructions
Heater
Heater temperature adjustment on cab LX/DLX is located
in the footwell left. On cab LX also the fan speed switch
is located in the footwell. On cab DLX fan speed switch is
located in the control panel up right.
Air flow temperature can be adjusted with the rotary
switch of the heater, located at seat base. Air flow can be
directed with the nozzles on the front panel and in the
footwell.
For faster heating, the cab is equipped with an air
recirculation system. A ventilation hatch is located below
the seat in the footwell. When the hatch is opened the
heating system pulls air from the cab and circulates it
through the nozzles back in the cab. This way the cab
warms up quicker in cold weather. The system can also be
used for cooling.
If used for heating, switch off the air circulation
as soon as the temperature in the cab is
sufficient, otherwise the cab keeps warming
up and moisture starts to condense on the
windows.
A replaceable cab air filter can be changed from outside the
cab, under the door on the left side (see picture above).
The cartridge (part no. 65118) should be changed more
often in dusty environment.
Do not cover the air vent hole in the cab,
located down in the right rear corner, in
order that moisture does not condense on
the windows. Also, do not operate the loader
without a cab air filter cartridge in place,
the ventilation system may collect excessive
amounts of dust.
Air conditioning (option for cab DLX)
Cab DLX can be equipped, as an option, with air
conditioning. A/C switch is located on the panel up to the
right. The A/C condenser is mounted at the factory either
on the roof of the loader, or when lower overall height is
wanted, to the rear of the cab. The condenser should be
kept clean and clear of debris.
The A/C will work only while the fan is switched on.
During winter, switch on the air conditioning for a few
minutes weekly in order to lubricate AC circuit and to
maintain the compressor in good condition.
To keep the A/C functioning efficiently, the system should
be serviced after every 2 years. Service of A/C systems is
only allowed for authorized service personnel.
Safety
Familiarise yourself with the special
drive features and space needs of this
articulated loader, equipped with cab,
on a flat, even and open place.
Remember that, when turning, the cab
extends beyond the turning radius of
the wheels. This should be taken into
consideration especially when driving
in confined spaces, in order that the
rear of the cab will not get damaged.
If necessary, the windscreen can be
broken with the emergency hammer
in the cab. This way it is possible to
get out of the cab in an emergency
situation.
The main fuse box on machines with
cab LX/DLX is located outside the cab,
on the right side below the windscreen.
See page 33.
On cab DLX with A/C additional fuses
are located in the fuse box near the
throttle lever, accessible by removing
the right side cover panel outside the
cab. See also page 33.
Do not drive with the
cab door open, nor turn
the steering wheel when
the cab door is open.
The door may break.
A/C Refrigerant
R134a, 760 g ±20 g
Fan
Temperature
adjustment
Fan
(cab LX)
Filter
