18
755/760i
Drive speed range selection switch
Avant 760i is equipped with two-speed hydraulic drive
motors. Drive speed range can be selected with the switch
on the control panel right (see page 14). In addition to
speed, the speed range switch affects the pulling force as
shown in table.
Higher speed range is intended for longer travels where
high pulling force is not necessary.
Do not change the drive speed range while
driving with a higher speed. Always stop the
machine first or slow down the speed before
switching on higher or lower speed. Be careful
when driving at higher speed range. Do not
turn the steering wheel quickly at high travel
speed.
Parking brake switch
The loader is equipped with a hydraulic parking brake. It
locks the front wheels. Parking brake is operated with the
switch on the control panel right (see page 14). On cab
LX/DLX the switch is located in the panel up right.
• A red indicator on the switch lights up
when parking brake is engaged.
• The green backlight under the “P” is lit all
the time.
Parking brake engages automatically when the engine is
stopped. The brake can be released only when the engine
is running and there is hydraulic pressure in the system.
Do not engage the parking brake when the
machine is moving unless in emergency. Using
the brake while moving may cause the locking
of front wheels and sudden stopping of the
machine.
If the parking brake is engaged repeatedly
when the machine is moving the brake plates
in the front drive motors will get worn quickly.
Always stop the machine before engaging the
brake.
Seat heater
The suspension seat is equipped
with an electric seat heater. Seat
heater switch (18) and indicator
are located on the dashboard.
Battery disconnect switch
The loader is equipped with a
battery disconnect switch. The
switch is located in the rear of the
machine, on the right side (see
picture). Battery disconnect
switch cuts the current between battery and the rest of
the electric system. Always switch off main current when
the loader is not used for a longer period of time in order
that the battery doesn’t get empty, or when servicing the
machine.
Telescopic boom
Telescopic boom is operated with
the control lever no. 8 on the
control panel (see page 15) or with
the rocker switch on the joystick
(see page 19). Length of the
telescope is 700 mm and additional
lifting height is 410 mm.
Smooth drive (option)
Avant 760i can be equipped, as
an option, with the smooth drive
which is a shock absorber system
for the boom. When driving at high
speed with a heavy load or heavy
attachment, the boom starts to
move up and down, making driving
unpleasant. The smooth drive
consists of an accumulator which absorbs and eliminates
boom movements and makes driving considerably
smoother and more stable. Smooth drive is switched on
with the boom floating switch no. 17.
NOTICE: The machine must also be equipped with both
boom self levelling and boom floating.
Switch on the smooth drive only when
stationary and when the load is close to the
ground to avoid change in stability caused
by possible movement of the boom when
switching on. Keep the smooth drive off when
loading or lifting with the loader.
Operating instructions
Speed range switch
Speed range with
standard tyres
0-15 km/h
0-30 km/h
Pulling force, forward 100%
50%
Pulling force, reverse 100%
25%
