AVANIT s2x, User Manual, Page: 61 / 96

Troubleshooting
AVANIT S2X 61

Place the receiver, cables and remote control in the original packaging.

Store the receiver and all accessories at a dry and dust-free location.

Protect the receiver from frost.
18 Troubleshooting
Indication Possible Cause Remedy
No sound or
picture, LED at the
receiver is lit. Receiver is in Standby mode. To switch on the receiver, press
the POWER key.
No sound or
picture. No signal or only a weak
signal. Check the cable connections to
the receiver and from the receiver
to the connected units and fasten
them, if necessary.
The TV set has no
picture. The system is not connected
properly.
Check the connection of the
SCART cable and fasten it if
necessary
Picture only black
and white and/or
not properly
synchronized. The video format of your
receiver is not set properly. Adjust the TV standard of your
receiver to that of the TV set.
The remote control
is not working. The batteries are used up.
The remote control is aligned
incorrectly.
Replace the batteries with new
ones.
Direct the remote control at the
front panel of the receiver.
If a malfunction cannot be eliminated by the above measures, please contact
your specialized dealer.
19 Disposal
Attention!
Never throw receiver and batteries in the normal domestic
waste.