AVANIT s2x, User Manual, Page: 53 / 96

Installation
AVANIT S2X 53
Change

Press blue "AUDIO" key
•
The red "FIND" key can now be used to resort the channel list.
•
The green "ZOOM" key can be used to rename the channel.
•
The blue "AUDIO" key can be used to delete the channel.
9.2 Delete All
All channels are deleted.
10 Installation
10.1 Antenna Selection
If several antennae are connected to your receiver, you can select the antenna
whose signal you want the receiver to receive.
10.2 Satellite List
Here you can set which satellites you are receiving.
10.3 Antenna Setup
In the Antenna Setup menu, you can make extensive settings with regard to the
received satellites, transponders, frequencies, motorized control, polarization,
etc.
Attention!
If you're in doubt, have an expert make the settings in this
menu.
For normal use, it is usually not required to make any
settings here.
10.4 Single Satellite Search / Multi Satellite Search / TP
List
In the "Single Satellite Search" menu, you can search individual satellites for
receivable channels.
In the "Multi Satellite Search" menu, you can search all received satellites for
receivable channels.