1.4
System memory
1.4.1
DIMM sockets location
The motherboard comes with four 240-pin Double Data Rate 2 (DDR2) Dual Inline
Memory Modules (DIMM) sockets.
The following figure illustrates the location of the sockets:
1.4.2
Memory
Configurations
You may install 256 MB, 512 MB and 1 GB unbuffered non-ECC DDR2 DIMMs
into the DIMM sockets using the memory configurations in this section.
•
For dual - channel c onf iguration, the total size of memor y module(s)
installed per channel must be the same (DIMM_A2 = DIMM_B2).
•
A l w a y s i n s t a l l D I M M s w i t h t h e s a m e C A S l a t e n c y. F o r o p t i m u m
compatibility, it is recommended that you obtain memory modules from the
same vendor. Refer to the DDR2 Qualified Vendors List on the next page
for details.
•
Due to chipset resource allocation, the system may detect less than 4 GB
system memory when you installed four 1 GB DDR2 memory modules.
•
This motherboard does not support memory modules made up of 128 Mb
chips or double sided x16 memory modules.
EAX-915GV
1-13
