2.6
Power
Management
Setup
The Power Management Setup menu items allow you to change the settings for
the Advanced Power Management (APM) and Advanced Configuration and Power
Interface (ACPI).
Phoenix - Award BIOS CMOS Setup Utility
Power Management Setup
Item Help
ACPI Function
[Enabled]
ACPI Suspend Type
[S1(POS)]
Soft-Off by PWR-BTTN
[Instant-Off]
Wake-Up by PCI card
[Enabled]
Power On by Ring
[Enabled]
Resume by Alarm
[Disabled]
x
Date(of Month) Alarm
0
x
Time(hh:mm:ss) Alarm
0 : 0 : 0
POWER ON Function
[BUTTON ONLY]
Hot Key Power ON
[Ctrl-F1]
Menu Level >
: Move
Enter:Select
+/-/PU/PD:Value
F10:Save
ESC:Exit
F1:General Help
F5: Previous Values
F6: Fail Safe Defaults
F7: Optimized Defaults
ACPI Function [Enabled]
Enables or disables ACPI function. Configuration options: [Enabled][Disabled]
ACPI Suspend Type [S1(POS)]
Allows you to select the ACPI state used for system suspend.
Configuration options: [S1(POS)] [S3(STR)] [S1&S3]
Soft-Off by PWR-BTTN [Instant-Off]
Select [Instant-Off], power will be off instantly. Select [Delay 4 Sec], power will be off
by pressing button 4 seconds. Enter suspend if button is pressed less than 4
seconds.
Wake-Up by PCI Card [Enabled]
Enables or disables system wake-up by PCI card. Configuration options:
[Enabled][Disabled]
Power On by Ring [Enabled]
An input signal on the serial Ring Indicator (RI) line awakens the system from a
soft off state. Configuration options: [Enabled][Disabled]
2-14
Chapter 2: BIOS setup
