2.5
Integrated Peripherals
The Integrated Peripherals menu items allow you to change the onboard devices
configuration settings.
Phoenix - Award BIOS CMOS Setup Utility
Integrated Peripherals
Item Help
OnChip IDE Device
[Press Enter]
Onboard Device
[Press Enter]
SuperIO Device
[Press Enter]
Menu Level
: Move
Enter:Select
+/-/PU/PD:Value
F10:Save
ESC:Exit
F1:General Help
F5: Previous Values
F6: Fail Safe Defaults
F7: Optimized Defaults
Phoenix - Award BIOS CMOS Setup Utility
OnChip IDE Device
Item Help
IDE HDD Block Mode
[Enabled]
IDE DMA transfer access
[Enabled]
On-Chip Primary PCI IDE
[Enabled]
IDE Primary Master PIO
[Auto]
IDE Primary Slave PIO
[Auto]
IDE Primary Master UDMA
[Auto]
IDE Primary Slave UDMA
[Auto]
*** On-Chip Serial ATA Setting
***
On-Chip Serial ATA
[Enhanced Mode]
x
PATA IDE Mode
Primary
SATA Port
P1,P3 is Seconary
Menu Level
If your IDE hard drive
supports block mode
select Enabled for
automatic detection of
the optimal number of
block read/writes per
sector the drive can
support.
: Move
Enter:Select
+/-/PU/PD:Value
F10:Save
ESC:Exit
F1:General Help
F5: Previous Values
F6: Fail Safe Defaults
F7: Optimized Defaults
IDE HDD Block Mode [Enabled]
Enables or disables IDE HDD Block mode. Configuration options:
[Enabled][Disabled]
IDE DMA Transfer Access [Enabled]
Enables or disables IDE DMA Transfer Access. Configuration options:
[Enabled][Disabled]
On-Chip Primary PCI IDE [Enabled]
Enables or disables primary PCI IDE support.
Configuration options: [Enabled] [Disabled]
2-10
Chapter 2: BIOS setup
