The Petite-X Revision B 03/2010
SERVICE MANUAL AVALON
La Petite-X
Single-Cup Brewer
51
Cleaning & Sanitizing
8.6.3 Coffee Brewer
Rinsing the Brew Chamber:
Frequency: Weekly or every 200 cycles
1. Place a large cup or other suitable container below the
dispensing nozzle to catch the HOT rinse water;
2. Toggle the ingredient switch to Off (SW5 see main board);
3. Order several coffees for the hot water to flow through the
system;
4. Toggle the ingredient switch back ON;
5. Remove the hose and remove the brew chamber’s
funnel to dislodge coffee residue trapped underneath it
and rinse it out;
6. Replace it and align the opening with the brown water
hose so that it is against the wall to form a circular water
motion around the funnel;
7. Order a large coffee to confirm that all parts have been
replaced correctly.
Brewer Funnel
Frequency: As needed or weekly
If there are coffee grounds accumulated, remove the assembly for manual cleaning under hot water:
1. Remove the brown water hose;
2. Lift off the funnel and pull out of the brew chamber;
3. Rinse thoroughly under hot water;
4. Air dry completely;
5. Reinstall all parts in the reverse order.
6. Order a large coffee to confirm that all parts have been replaced correctly.
Brewer Assembly Cleaning
Frequency: Monthly or every 1,000 cycles
In order to maintain optimal performance of the brewer
assembly, we recommend that it be removed
from the unit and cleaned / rinsed with hot water.
(see page 61 for instructions on removing the brewer)
1. Rinse thoroughly under hot water to remove visible soil;
2. Lift off the funnel and pull out of the brew chamber;
3. Rinse thoroughly under hot water;
4. Air dry completely;
5. Reinstall all parts in the reverse order.
6. Order a large coffee to confirm that all parts have
been replaced correctly.
Brew Chamber
Brewer Funnel
Brewer Chamber
Hose Support
