The Petite-X Revision B 03/2010
SERVICE MANUAL AVALON
La Petite-X
Single-Cup Brewer
29
Initial Setup
6.7
Electrical Connection
This equipment must be installed in compliance with applicable Federal, State and/or
Local electrical codes having jurisdiction.
Make sure:
- The equipment is OFF before plugging it in,
- The equipment has its own electrical outlet and
- An extension cord is not used.
1. Make sure that the power switch in the back of the unit is in the OFF position before plugging in
the unit;
2. Locate the unit’s 6 foot power cord and plug it into its own grounded electrical outlet;
3. Reach to the back of the brewer and toggle the power switch to the On position. The front lights
will go on, and water will automatically enter the brewer. The tank will fill in 2-3 minutes from the
moment the brewer is turned on;
4. Once the tank is full, it will take 15-20 minutes to heat the water to brewing temperature. ;
5. Once the brewing equipment is ready, the LCD will indicate “Hi! Make Your Choice”.
The main power switch turns the equipment off and on. This switch should be turned OFF when
servicing any (AC line voltage) electrical components on the equipment.
