Avalon Bay Electric Pressure Cooker Product Guide
10
http://www.avalon-bay.com
Do not move the deep fryer during cooking or whilst hot.
When deep frying, make sure that no water comes in contact with hot oil as this will cause
splattering.
Ensure that the deep fryer is dry before adding any oil.
Never lean over the deep fryer when lifting the lid.
Excess trapped steam created during the cooking process will be released when the lid is
opened.
Never pour oil out of the deep fryer when either the unit or oil is hot.
Allow both the unit and contents to cool completely before removing the oil.
It is not recommended to add extra oil when hot as splashing may occur.
Always ensure the heater element and controller are correctly positioned onto the bowl
assembly and filled to min/max before connecting to a power outlet.
Do not use the deep fryer on metal surfaces, for example, a sink drain board.
At no time should the deep fryer be left unattended when in use.
Do not place anything on top of the deep fryer when the lid is closed, when in use and when
stored.
The installation of a residual current device (safety switch) is recommended to provide
additional safety protection when using electrical appliances.
It is advisable that a safety switch with a rated residual operating current not exceeding 30mA
be installed in the electrical circuit supplying the appliance.
See your electrician for professional advice.
Assembly Instructions
1.
To open the lid - When the lid is closed, hold the handle and turn it
clockwise until the lid can be lifted up. See figures 1-3.
2.
To close the lid - When the lid is open, hold the handle and pull down.
Once down, turn counterclockwise until the lid reaches the closed
position. See figures 4-6.
