AV Stumpfl SC MASTER LITE, User Manual, Page: 88 / 117

80
•
The Menu Items
Transpd when transponders are to be used
ChipCrd for reading chip cards (e.g. show start)
*) In Simple Mode for Rollei Twin there is no automatic alloca-
tion of odd tray numbers to A and even tray numbers to B.
This mode must not be used in combination with Wings Plati-
num.
NumOfPr (Number of Projectors)
This menu enables you to select the number of slide projectors
used in your set-up, e.g. NP=4, for four projectors. Choose
NP=2 for RolleiTwin projectors.
Timer
SC MASTER is equipped with a timer for time-controlled
dissolves by means of a Projector Module or for starting whole
shows from CF card. The following menus allow you to select
the corresponding timer parameters.
AutoTim (Auto Timer)
By activating the auto timer (AT=ON), SC MASTER starts
timer operation immediately after starting up. This may come