AV Stumpfl SC MASTER LITE, User Manual, Page: 38 / 117

30
•
Producing a Show Medium
6. Select the device port the control data of which are to be
used. Normally, you can leave the default setting. Altera-
tions may only be necessary when there are several de-
vice ports being used. Now click "
Start ".
4. Select an MP3 encoder. Encoders listed under " Encoder
(direct) " will generate the MP3 files without saving any
temporary data on hard disk. "Encoder (via wave file)"
will temporarily save the sound track as wave file in the
FlashCard directory, use it to produce MP3 files and finally
delete the wave file again. You only need to make sure
that the drive of the FlashCard directory has enough
memory capacity.
6. Now select a data rate. Usually, 128 kbits/s should be
sufficient for CD quality. If you are not satisfied with the
quality try to improve the result by choosing a higher data
rate.