Page
12
of
45
Pan and Tilt Adjustment
1.
Use the supplied security L-key, to loosen the four (4) screws which secure the cover. See Pic. 1.
2.
Remove the cover.
3.
Adjust the pan and tilt of each camera module to obtain the desired field of view.
Do not to press the remote focus motor against the sides of camera module when adjusting the field
of view (refer to the image below).
4.
Lock the camera head in place by tightening at least two of the three set-screws with the supplied flat-
head screwdriver. Do not over torque the screws (refer to the image below)
5.
Re-attach cover to camera.
