Page
36
of
45
Event
Menu
Feature
Description
Event > Motion Detection
Enable motion detection Turn on and off on-camera motion
detection.
Enable extended motion
detection
Enables the extended motion detection
and motion detection zones with an
increase from default 64 to 1024 for
enhanced motion detection sensitivity.
Select channel
Select the desired channel to apply
motion detection.
Zone Size
Adjusts the size of motion detection
zones.
Object Size Sensitivity
Sets the size of each zone displayed by
the motion detection grid. Contains sub
zones where the number of sub zones is
set by setting the zone size up to 32x32
(pixels). This setting configures the
sensitivity of the motion detection to the
size of objects in the image moving
through the zone. Higher values will
trigger motion only for larger objects
moving through the zone, and lower
values will cause detection of smaller
objects in the zone (increasing sensitivity
to smaller size objects moving through
the image).
Movement Duration
Factor
Sets the sensitivity to brightness changes
between dark and light objects within
each grid zone. As an example, “Object
Size Sensitivity” will set the size of the
object detected within the zone, and
“Movement Duration Factor” sets the
duration that movement must be
maintained to trigger motion detection.
Lower settings can increase false motion
alarms caused by image noise; higher
settings will require more movement to
trigger a motion event.
Motion Sensitivity
Sets the sensitivity to sudden overall
brightness changes in the image.
Enable Alarm Detection
Enables Alarm Detection (Alarm In)
function.
