background image

Page 12

Instruction manual 50170101

Version 1 April-08

Thank you for choosing this equipment. We sincerely wish that you enjoy your meta-

llurgical microscope Zuzi 101. We highly recommend looking after this equipment accor-
ding to what is stated in this manual.

Zuzi develops its products according to the CE marking regulations as well as empha-

sizing the ergonomics and security for its user. 

The correct using of the equipment and its good quality will permit you to enjoy this

equipment for years.

The improper use of the equipment can cause accidents and electric discharges, circuit

breakers, fires, damages, etc. Please read the point of Maintenance, where we expose the
security notes.

TO GET THE BEST RESULTS AND A HIGHER DURATION OF THE EQUIP-

MENT IT IS ADVISABLE TO READ THOROUGHLY THIS MANUAL BEFORE
OPERATING WITH THE EQUIPMENT.

Please bear in mind the following:
This manual is inseparable from the video microscope Zuzi 101, so it should be availa-

ble for all the users of this equipment.

You should carefully handle the video microscope avoiding sudden movements,

knocks, free fall of heavy / sharp objects on it. Avoid spilling liquids inside the equipment.

Never dismantle the different pieces of the video microscope to repair it yourself, since

it could produce a defective use of the whole equipment and a loss of the product
warranty, as well as injuries on people that handle the video microscope.

To prevent fire or electric discharges avoid dry or dusty environments. In case it may

happen unplug the equipment immediately. 

If you have any doubt about setting up, installation or functioning do not hesitate in

contacting your wholesaler. You can also tell us any doubts or suggestions you have by
contacting Zuzi Technical Assistance Department by email to [email protected] or by
telephone: +34 807 117 040 (0.30 Euros/min).

This equipment is protected under the Warranties and consumer goods regulation

(10/2003).

Overhaul is not covered by the video microscope warranty.
Operations made by non-qualified staff will automatically produce a loss of the video

microscope warranty.

Neither fuses nor accessories (including their loss), are covered by the product’s

warranty. The warranty neither covers piece’s deterioration due to the course of time.

Please make sure you keep the invoice, either for having the right to claim or asking for

warranty coverage. In case you have to send the equipment to Zuzi Technical Assistance
Department you should enclose the original invoice or a copy as guarantee.

Please do not forget filling the warranty certificate and send it before 15 days after the

date of purchase.

Manufacturer reserves the right to modify or improve the manual or equipment.




Version 1 April-08

Instruction manual 50170101

Page 21

parts.

NOTE: Never disassemble the objective lenses

I

NSTRUCTIONS ON ENVIRONMENT PROTECTION

over at a collection point for the recycling of electrical and electronic

appliances. The symbol on the product, the instructions for use or the pac-
king will inform about the methods for disposal.

The materials are recyclable as mentioned in its marking. By recycling,

material recycling or other forms or re-utilization of old appliances, you are making an
important contribution to protect our environment.

Please inquire at the community administration for the authorized disposal location. 

ATTENTION!!  IF EQUIPMENTS ARE NOT PROPERLY CLEAN AND DISINFEC-

TED THEY WOULD NOT BE ALLOWED TO REPAIR BY OUR TECHNICAL SERVICE.

ENGLISH

ENGLISH

Summary of Contents for 50170101


















Reviews: