AUX F Series, Technical Manual

Page: 99 / 234

AUX DC Inverter Free Match 50HZ R32
99
POWER button : Switch the unit ON/OFF.
MODE button : Select mode, push the button one time, then the operation modes will change
in turn as Auto-Cooling-Dehumidify-Heating
TEMP + button and TEMP - button : Temperature adjustment range: 16~32
FAN button : Change the fan speed will change in turn as: Low-Medium-High-Auto
SWING button : Press this button for the first time when operation, it will start the swing
function. Push the button for the second time, cancel the swing function. (The function is available
matched with the concerned unit)
TIMER/CLOCK button
:
Clock Setting:
Normally display the clock set currently (display 12:00 for the first electrifying
or resetting). When press the button for 5 seconds, the time display zone will flicker, then press
【
+
】
and
【
-
】
button and to adjust hour that uses 12-hour clock including “A.M.” and “P.M.”
time; Press the button again to complete the setting.
Timer setting: Press the button to set TIMER ON/OFF, press the button then “ON” will flicker
on the display screen. then press
【
+
】
and
【
-
】
button and to adjust hour that uses 12-hour
clock including “A.M.” and “P.M.” time; Press the button again to complete the setting. The
“OFF” setting is the same methods.
Remark: When setting functions such as mode, temperature, air port and air velocity,
display screen displays all presetting parameters and remains constant; after reaching
presetting time, air conditioner will automatically start as per presetting state.
After setting timing ON and OFF function, pressing button of
【
Timer/Clock
】
can
cancel timing setting.
SLEEP button :
1. Press the button to the sleeping indicator light of indoor unit flashes on;
2. After the setting of sleeping mode, the cooling operation enables the set temperature to
increase 1
℃
after 1 hour and another 1
℃
automatically after 1hour.