AUX AMWM-H07/4R3 Technical Manual Download Page 167

Page: 167 / 200

AUX DC Inverter Free Match 50HZ

R32

167

7. Outdoor Unit

7.1 Installation location

◇

The site shall be strong enough to bear its weight, prevent noise and vibration.

◇

The site shall be ensured to avoid direct sunshine, if necessary set a Havelock above the

outdoor unit.

◇

The site shall be easy to drainage the rain water and the frost water.

◇

The site shall be ensured that the outdoor unit will not be covered by snow LD ring the

winter season.

◇

The site shall be ensured that the outlet is not facing the strong wind.

◇

The site shall be ensured that outlet air and operation noise will not affect the neighbors’

daily life.

◇

The site shall be ensured that the outdoor unit will not be affected by the garbage and oil

mist.

Warning :

If outdoor unit working under such environment which contains oil (including machine oil)

salt(marine areas), sulfide gas (hot springs and oil refinery areas), those substance may lead to
the failure work of the outdoor unit.

7.2 Maintenance and ventilation space

◇

The site shall be easy for ventilation then the outdoor unit can inhale and discharge air

easily. What’s more please reserve enough space for maintenance.

Summary of Contents for AMWM-H07/4R3









































































































































































































Search results

Summary of Contents for AMWM-H07/4R3

Reviews:

Related manuals for AMWM-H07/4R3

Brands by name

Popular brands

AUX AMWM-H07/4R3, Technical Manual

Search results

Summary of Contents for AMWM-H07/4R3

Reviews:

Related manuals for AMWM-H07/4R3

Brands by name

Popular brands