WMS
BARCODE
USER
GUIDE
Autopower Corporation Copyright 2017
75 |
P a g e
This is the quantity on hand after the part has been counted.
Unit Var:
The unit variance is the difference between the Before and After QOH. If the New QOH is higher
than the Before QOH, this will be a positive number. If the New QOH is less than this number,
then the number will be negative. If both numbers are the same and there is no variance, a zero
will print.
Std Pack
:
The parts standard packing size will print in this field. It will represent how many are in a pack.
This information is retrieved from the Inventory Master file.
POP:
This field represents the factory pop code for this part. The information is retrieved from the
Inventory Master file.
Unit Meas:
The part numbers unit of measure will display. This information is retrieved from the Inventory
Master file.
Unit Cost:
The parts unit cost will print in this field. This information is retrieved from the Inventory
Master File.
Ext-Cost Variance:
The Ext-Cost Variance is the total cost of the difference between snap shot quantity and the
shelf count quantity. The unit cost is multiplied by the unit variance to determine the extended
variance price for this part.
Core Cost:
If there is a core associated with the part, the cost of the core will display in this column.
Ext Core Var:
The Extended Core Variance for the Before and After QOH count for the part with the core will display.
This would be a dollar figure that is compiled of the variance for the Before and After QOH multiplied by
the Core Cost.
A Physical Inventory Variance Summary Report will print after the
Detailed Report.