the specified range. If you did not receive a power cord with
your matrix, contact your authorized AutoPatch dealer.
To apply power, toggle the power switch up. To turn power
off, toggle the power switch down.
After applying power, test the I/O connections by making a
switch. Refer to section 2.1, “Making and Disconnecting
Switches,” for instructions.
1.6 Startup Sequence
The startup sequence begins when power is applied to an
enclosure. The enclosure(s) is designed to be continuously
powered up. Upon power up, the power LED illuminates,
followed closely by the Level LEDs. While the matrix is
running, the I/O configuration is stored in RAM. I/O
configurations are not restored after power has been cycled.
1-5
Getting Started
