Chapter 2—Operating the Distribution Matrix
half-Y
switching operations require a few simple key presses
using an X/Y Control Panel, or a few basic commands using
one of several other controllers.
Please note that unless otherwise specified, all the procedures
in this chapter are written for an AutoPatch X/Y Control
Panel. For instructions on operating your matrix from an
external serial controller, refer to Appendix C in this manual.
For all other controlling devices, please refer to the
installation and operations manual that came with the device.
This chapter covers:
q
Making and Disconnecting Switches
q
Checking Status
q
Locking Out Control Panel Switches
q
Switching During the Vertical Interval
