3.2.4 Power Switch
The power switch is on the left side of the enclosure, between
the power connector and the vertical interval sync connector.
Toggle the switch up to turn the enclosure on, and down to
turn the enclosure off. The enclosure contains volatile RAM,
so if the enclosure is turned off and then turned back on,
previous I/O configurations are not recalled.
3.2.5 Power Connector
The power connector is on the left side of the enclosure. The
voltage requirements are as follows: 100 - 250 VAC at
approximately 1.6 Amp at 50/60/440 Hz, or 120 - 300 VDC at
approximately 1 Amp. The power supply is universal and
automatically adjusts to fit your electrical environment
within the specified range.
3-4
Chapter 3
figure 3.5 Enclosure CPU
Power Connector
Power Switch
Vertical Interval Sync Connector
DB-9 Port
