background image

C3 RS915 REV. O1 

Congratulations on your purchase of the RS-915 LCD remote start vehicle security system.    We sincerely hope 

the purchase of the RS-915 remote start security system gives peace of mind to you.     

The RS-915 LCD is a state-of-the-art two-way communication system.    Please take the time to read over this 
manual to thoroughly familiarize your self with the many features and options of the RS-915 LCD. 

WARNINGS: 

As  with  any  product  that  performs  automatic  functions,  there  are  certain  safety  precautions  that  you  must 
practice and be aware of. 

1. 

Keep the transmitter out of children’s reach.

 

2.  Do not leave anyone in the vehicle while running on remote control. 
3.  Alert servicing personnel that the vehicle can be started automatically. 
4. 

Do not start the vehicle by remote while it’s in an enclosed area or garage.

 

5.  Always apply the parking brake and lock the vehicle as you exit the vehicle. 
6.  The vehicle windows must be rolled up. 
7.  Should the unit malfunction, disconnect the fuse until the problem is corrected. 
8.  The use and operations of this system is the sole responsibility of the operator. 
9.  Some areas may have local ordinances that prohibit leaving a vehicle running on public streets. 
10.It is not safe to remote start the vehicle if the vehicle is parked on a steep incline. 

     

  LCD REMOTE CONTROL TRANSCEIVER

: XT-915 LCD

 

A.  BATTERY CHARGING: 

This system has a built in rechargeable power source.    Please charge the battery fully with the 
supplied charger before initial use.    Depending on the usage, the remote should be charged at 
least once a month. Do not use other chargers on this remote as they could damage the 
rechargeable batteries.      The 1-way remote is powered by a pair of 3V, CR2016 batteries.   

Battery Level Indicator (2-way remote) 

The Battery Level indicator has three level indicators that serve as a visual indication of battery 
charge. When the battery reaches a low charge level that requires charging, the remote control will 
generate a single notification chirp, and the Battery Level indicator 

 

will flash continuously. 

МSVMASTER

 - Установка и разблокировка охранных систем автомобилей - 

http://www.msvmaster.lv

МSVMASTER

 - Установка и разблокировка охранных систем автомобилей - 

http://www.msvmaster.lv

Summary of Contents for C3-RS-915 LCD

















Reviews: