Autonics TK Series, User Manual

Page: 57 / 124

6 Parameter Settings and Functions
© Copyright Reserved Autonics Co., Ltd. 57
6.1.4 Analog input/scale value
With analog input selected, you can set the analog input range (high/low limit input values) and
the display scale (high/low limit scale values) within the designated input range.
The decimal point positions remain fixed when configuring the high/low limit input values. You
can change the input values at
AV1
: 00.00,
AV2
/
AV3
: 0.000,
AMV1
: 000.0,
AMA1
/
AMA2
: 00.00
decimal points.
If the upper and lower limit scale settings are identical,
ERR
flashes twice and setting mode is
displayed.
For analog input,
±
5% of the set high/low limit input value is extended. Analog output is also
extended compairing input value. (For temperature sensor input,
±
5% extension is applied
within the temperature range.)
No. PV Display
① ±
5% section Flashes PV
② ±
5 to 10% section
Flashes
HHHH
or
LLLL
③ Over ±
10% section Flashes
OPEN
This parameter is not displayed for temperature sensor input.
6.1.4.1 Low-limit input value [
PAR3
→
L-RG
]
You can set the low limit input values for actual use within the analog input range.
Setting
group
Parameter Setting range
Factory
default
Unit
PAR3 L-RG
Minimum temperature range to high-limit
input value [
H-RG
] - F.S. 10%
0)00
-
6.1.4.2 High-limit input value [
PAR3
→
H -RG
]
You can set high limit input values for actual use within the analog input range.
Setting
group
Parameter Setting range
Factory
default
Unit
PAR3 H-RG
Low-limit input value [
L-RG
] + F.S. 10% to
maximum temperature range
1)00
-