Autonics TK Series, User Manual

Page: 26 / 124

2 Specifications
26 © Copyright Reserved Autonics Co., Ltd.
Integral time (I) 0 to 9999sec.
Derivative time (D) 0 to 9999sec.
Control period (T)
Relay output, SSR drive output: 0.1 to 120.0 sec.
Current SSR drive output: 1.0 to 120.0 sec.
Manual reset value 0.0 to 100.0%
Sampling period 50 ms
Dielectric strength 2,000 VAC 50/60 Hz for 1 min. (between power source terminal and input terminal)
Vibration resistance
0.75mm amplitude at frequency of 5 to 55 Hz (for 1 min.) in each of X, Y, Z directions
for 2 hours
Relay
life
cycle
Mechanical
OUT1/OUT2: Min. 5,000,000 operations
AL1/2: Min. 20,000,000 operations (TK4H/W/L: Min. 5,000,000 operations)
Electrical
OUT1/OUT2: Min. 200,000 operations
AL1/2: Min. 100,000 operations(TK4H/W/L: Min. 200,000 operations)
Insulation resistance Min. 100MΩ (at 500VDC meg ger)
Noise resistance
Square shaped noise by noise simulator (pulse width 1
㎲
) ±2 kV R-phase, S-phase
Memory retention Approx. 10 years (non-volatile semiconductor memory type)
Environ
-ment
Ambient
temp.
-10 to 50
℃
, Storage: -20 to 60
℃
Ambient
humi.
35 to 85% RH, Storage: 35 to 85% RH
Protection IP65 (front panel)
※
TK4SP: IP50 (front panel)
Insulation type
Double insulation or reinforced insulation (mark: , dielectric strength between the
measuring input part and the power part: 2kV)
Approval
Weight
※
2
Approx.
140 g
(Approx.
70 g)
Approx.
130 g
(Approx.
85 g)
Approx.
150 g
(Approx.
105 g)
Approx.
210 g
(Approx.
140 g)
Approx. 211 g
(Approx. 141 g)
Approx.
249 g
(Approx.
198 g)
※1. At room Temperature range (23℃ ± 5℃ )

TC K, J, T, N, E type , below - 100℃ / TC L, U, PL
Ⅱ
, RTD Cu50
Ω
, DPt50
Ω
:
(PV ±0.3% or ±2℃ , select the higher one) ± 1 digit

TC C, G , R, S type bellow 200℃ : ( PV ±0.3% or ±3℃ , select the higher one)
± 1 digit

TC B type, below 400℃: There is no accuracy standard.
Out of room temperature range

RTD Cu50
Ω
, DPt50
Ω
: (PV ± 0.5% or ± 3℃ , select the higher one) ±1 digit

TC R, S, B, C, G type: (PV ± 0.5% or ± 5℃ , select the higher one) ±1 digit

Others, Below - 100℃ , Within ± 5℃
In case of TK4SP Series, ± 1℃ will be added to the degree standard .
※2. The weight is with packaging and the weight in parentheses is only unit weight.
※
Environment resistance is rated at no freezing or condensation.