Autonics GP-S057 User Manual Download

Page: 54 / 80

6 System Screen

© Copyright Reserved Autonics Co., Ltd.

6.4.8

Backlight

Designate back light off time.

If there is no touch on screen of GP until off time of backlight, LCD backlight is OFF. Backlight is

ON again when user touches it. In this case touching is only for backlight ON and the other

operation is not valid.

No.

Function and operation

①

Designate back light off time if there is no touch input.



0 to 9: Touch the desired time.



CLR: Cancel the set input, input cursor disappears.



ENT: Set the input value.

Set range is 0 min to 99min. If 0 is set, backlight is not OFF
Depending on the status from [System information device]–[Backlight control bit of read

device] in GP, it controls the designated operation.

Backlight setting and operation is available only when backlight control device is SET

(ON). If backlight control device is RESET (OFF), it does not operate irrespectively menu

setting.

②

Displays the set time for back light off.
Touch the time to reset, input cursor appears to set.

Summary of Contents for GP-S057

















































































Search results

Summary of Contents for GP-S057

Reviews:

Related manuals for GP-S057

Brands by name

Popular brands

Autonics GP-S057, User Manual

Search results

Summary of Contents for GP-S057

Reviews:

Related manuals for GP-S057

Brands by name

Popular brands