Autonics GP-S057 User Manual Download

Page: 45 / 80

6 System Screen

© Copyright Reserved Autonics Co., Ltd.

6.4.2

PLC setting

This menu displays connected device to RS232C, RS422 port of GP. You can designate station

and connected port by each channel.

No.

Function and operation

①

CH1 configuration

line

Displays connected device and connect port for CH1.
Touch this to select one from downloaded protocol in EDITOR,

PRINTER, BARCODE and designate connect port. (Select RS232C or

RS422 or depending on CH2 setting, CH1 may be changed as the

other).
Depending on the setting, CH1 may be changed as ‘No Use’.

②

CH1

PLC protocol

Displays PLC protocol of CH1

③

CH1

connect port

Displays connect port of CH1

④

CH2 configuration

line

Displays connected device and connect port for CH2.
Touch this to select one from downloaded protocol in EDITOR,

PRINTER, BARCODE, MONITOR protocol and designate connect port.

(Select one of RS232C or RS422 or depending on CH1 setting, CH2

may be changed as the other.)

If CH1 is SLAVE, MONITOR does not appear.

⑤

CH2

PLC protocol

Displays PLC protocol of CH2

⑥

CH2

connect port

Displays connect port of CH2

⑦

GP station
configuration touch

key

Touch this and input key pad for decimal (DEC) appears. It is available

the range from 0 to 31.

⑧

Configuration
touch key by each

channel

Touch this and input key pad for decimal (DEC) appears. It is available

the range from 0 to 255.

Summary of Contents for GP-S057

















































































Search results

Summary of Contents for GP-S057

Reviews:

Related manuals for GP-S057

Brands by name

Popular brands

Autonics GP-S057, User Manual

Search results

Summary of Contents for GP-S057

Reviews:

Related manuals for GP-S057

Brands by name

Popular brands