Ital E-Bike user manual - Edition 01 - 2020
55
MAINTENANCE AND CARE
Regular and proper care of the bicycle is important and
one of the conditions for maintaining the warranty.
Corrosion caused by poor maintenance or damage
caused by winter weather conditions is not covered by
the warranty. Protect your Ital E-Bike from any contact
with corrosive substances by using a spray wax or a similar
protective product. Clean your Ital E-Bike after any contact
with corrosive substances and reap-ply the protection as
described below. For washing do not use pressure
washers. A strong pressure washer can damage your Ital
E-Bike and result in a short circuit (fire hazard).
PLEASE NOTE:
Proper maintenance extends the life of the bike and its components.
1.
Perform regular cleaning and maintenance of your bike.
2. For washing use only a gentle water spray or a bucket of water and a sponge.
3. Use only clean fresh or desalinated water. Do not use salt water (e.g. seawater).
With many detergents and in the presence of low levels of dirt, it is sufficient to
spray the product and rinse after leaving it to act for the prescribed time. Then
stubborn dirt can be removed with a brush before rinsing.
Cleaning agents, lubricants and protective agents are chemical products. Some
of these products can damage your Ital E-Bike. Only use products specifically
designed for bicycles. Make sure the products do not attack paint or rubber parts,
plastic, metal, etc. Consult your dealer. Strictly follow the indications of the
manufacturers.
PLEASE NOTE:
AFTER THE FIRST 500 KM CARRY OUT AN INSPECTION OF ALL SCREWS OF
THE SINGLE ARM FORK ON THE
Ital E-Bike
. SUBSEQUENTLY CARRY OUT THIS
IN-SPECTION EVERY 1000 KM.
