Ital E-Bike user manual - Edition 01 - 2020
56
WASHING
For washing do not use steam jets or high
pressure cleaners. A strong jet of water can
damage your Ital E-Bike or result in a short circuit
(fire hazard). For this reason it is advisable to adopt
the procedures described below.
1.
Turn off the Ital E-Bike using the display and
remove the key from the lock.
2. Protect the display with a bag and seal it.
3. Remove the first layer of dirt with a gentle
stream of water.
4. Spray on a cleaning agent.
5. Gently rub with the help of a cloth or sponge and
after washing rinse with a stream of water
NOT AT HIGH PRESSURE.
6. Remove the battery and blow inside the frame
to remove any standing water.
7. Remove the rear wheel and clean the shaft
and hub assembly .
8. Grease the mating surfaces with lithium grease,
which is water resistant.
VERY IMPORTANT!!!
Keep the
mating surface
between rear hub and wheel
(A) always lubricated with lithium grease.
A
