2
NeoSlider
TM
- Sliding Gate Opener NES-24V3
Owner Installation Instructions
Automatic Technology Australia Pty Ltd to the extent that such may be lawfully excluded hereby expressly disclaims all conditions or warranties, statutory
or otherwise which may be implied by laws as conditions or warranties of purchase of an Automatic Technology Australia Pty Ltd Garage Door Opener.
Automatic Technology Australia Pty Ltd hereby further expressly excludes all or any liability for any injury, damage, cost, expense or claim whatsoever
suffered by any person as a result whether directly or indirectly from failure to install the Automatic Technology Australia Pty Ltd Garage Door Opener in
accordance with these installation instructions.
NeoSlider
TM
Sliding Gate Opener NES-24V3
Contents
1. Important Safety Instructions
3
2. Control Board Layout
4
3. Set Up Requirements
5
3.1 Kit Contents
5
3.2 Choosing your Set up
5
4. Drive Unit Installation
6
4.1 Initial Checking
6
4.2 Mounting the Drive Unit
6
4.3 Installing antenna
6
5
.
Rack & Limit Actuator Installation
7
5.2 Fixing limit actuator to rack
7
5.1 Mounting rack to gate
7
6. Programming The NeoSlider
TM
8
6.1 Common Programs
8
6.2 Powering up the NeoSlider
TM
8
7. Safety Beams
9
7.1 Installation of Safety Beams to the NeoSlider
TM
9
7.2 Safety Beam Failure Emergency Close (SBFEC)
9
8. Setting Limits
10
8.1 Setting Travel Limits
10
8.2 Setting the left/right installation side settings
10
8.3 Setting close travel limit
10
8.4 Setting open travel limit
10
8.5 Automatic limit adjustment and load profile
11
8.6 Pedestrian access position
11
8.7 Errors during setting of travel limit
11
9. Safety Obstruction Force Test
12
9.1 Testing Close Cycle
12
9.2 Testing Open Cycle
12
9.3 Force Pressure For Close and Open Cycle.
12
9.4 Reprofiling Travel
12
10. Coding Transmitter
13
10.1 Coding Transmitter Button
13
10.2 Selecting Function Of The Button
13
10.3 Returning To Main Screen
13
11. Remotely Coding Transmitters
14
11.1 Selecting The Function To Be Coded
14
11.2 Activate Remote Code Set Mode
14
12. Battery Replacement
15
13. Battery Disposal
15
14. Setting Pedestrian Position
16
14.1 Setting pedestrian position
16
14.2 Pedestrian Position Set
16
14.3 Error Displays
16
15. Auto-Close Mode
17
15.1 Setting Up Standard Auto-Close
17
15.2 Safety Beam Triggered Auto Close
17
15.3 Pedestrian Auto-Close
17
15.4 Auto-Close After Obstruction
17
16. Accessories Installation
18
16.1 Fitting Solenoid Or Magnetic Locks
18
16.2 Fitting Courtesy Lights
18
17. Specifications
19
18. Troubleshooting
20
19. Appendix
21
A - Console Menu Structure
21
B - Viewing and Editing Parameters
23
C - Wiring Dual NeoSlider Kit
24
D - Control Board Adjustments
25
E- Diagnostic Tools
27
F - Memory Tools
28
G- Transmitter Editing
29
H- Transmitter Managment
31
20. Warranty and Exclusion of Liability
32
