2
Owner Installation Instructions
NeoSlider
TM
- Sliding Gate Opener NES-500 / NES-800
Automatic Technology Australia Pty Ltd to the extent that such may be lawfully excluded hereby expressly disclaims all conditions or warranties, statutory
or otherwise which may be implied by laws as conditions or warranties of purchase of an Automatic Technology Australia Pty Ltd Garage Door Opener.
Automatic Technology Australia Pty Ltd hereby further expressly excludes all or any liability for any injury, damage, cost, expense or claim whatsoever
suffered by any person as a result whether directly or indirectly from failure to install the Automatic Technology Australia Pty Ltd Garage Door Opener in
accordance with these installation instructions.
NeoSlider
TM
Sliding Gate Opener NES-500 / NES-800
Contents
1. Important Safety Instructions
3
2. Control Board Layout
4
3. Set Up Requirements
5
3.1 Kit Contents
5
3.2 Choosing your Set up
5
3.3 Initial Checking
5
4. Drive Unit Installation
6
4.1 Mounting the Drive Unit
6
4.2 Installing antenna
6
5
.
Rack & Limit Actuator Installation
7
5.1 Mounting rack to gate
7
5.2 Fixing limit actuator to rack
7
6. Programming The NeoSlider
TM 8
6.1 Common Programs
8
6.2 Powering up the NeoSlider
TM
8
7. Safety Beams
8
7.1 Installation of Safety Beams to the NeoSlider
TM
8
7.2 Safety Beam Failure Emergency Close (SBFEC)
8
8. Setting Limits
9
8.1 Setting Travel Limits
9
8.2 Setting the left/right installation side settings
9
8.3 Setting close travel limit
9
8.4 Setting open travel limit
9
8.5 Automatic limit adjustment and load profile
9
8.6 Pedestrian access position
9
8.7 Errors during setting of travel limit
9
8.8 Recalculate Force Margins
9
9. Safety Obstruction Force Test
10
9.1 Testing Close Cycle
10
9.2 Testing Open Cycle
10
9.3 Force Pressure For Close and Open Cycle.
10
9.4 Reprofiling Travel
10
10. Coding Transmitter
11
10.1 Coding Transmitter Button
11
10.2 Selecting Function Of The Button
11
10.3 Returning To Main Screen
11
10.4 Selecting The Function To Be Coded
11
11. Emergency Release
12
11.1 Your gate CAN NOT be used by the opener when: 12
11.2 Your gate CAN be used when:
12
11.3 To Disengage the Opener:
12
11.4 To Re-Engage the Opener:
12
12. Setting Pedestrian Position
12
12.1 Setting pedestrian position
12
12.2 Pedestrian Position Set
12
12.3 Error Displays
12
13. Auto-Close Mode
13
13.1 Setting Up Standard Auto-Close
13
13.2 Safety Beam Triggered Auto Close
13
13.3 Pedestrian Auto-Close
13
13.4 Auto-Close After Obstruction
13
14. Accessories Installation
14
14.1 Fitting Solenoid Or Magnetic Locks
14
14.2 Fitting Courtesy Lights
14
15. Battery Replacement
15
16. Battery Disposal
15
17. Specifications
16
18. Troubleshooting
17
19. Appendix
18
A - Console Menu Structure
18
B - Viewing & Editing Parameters
20
C - Wiring Dual NeoSlider Kit
21
D - Control Board Adjustments
22
E- Diagnostic Tools
23
F - Memory Tools
24
G- Transmitter Editing
25
H- Transmitter Managment
26
20. Warranty and Exclusion of Liability
27
