Automatic Systems PPV323, User Manual

Page: 33 / 40

The informat ion conta ined in th is docu ment is the property of Automat ic Syst ems and is conf ident ial. The rec ip ient is forb idd en to use it for any purpose ot her
than for the use of the products or the exe cut ion of the project to wh ich th ey refer or to communicate it to th ird parties w ithout the pr ior wr itten conse nt of
Automat ic Systems. Document sub ject to change w ithout advance not if icat ion .
SL93x + TBV327-MT-EN p. 33/40
5.11. Error messages
Message Cause
Defect Actuation of the buzzer (4 times quickly).
Message displayed when a defect is detected:

Value set by the "Fault Timer" parameter exceeded.

"Fault Numbers" parameter exceeded (see p 32).

The contact plate (73, p 16) is not in contact with the hold magnet (72, p
16).
Alarm Equipment Out of Order after a persisting defect.
Exit by an opening command.
DI
“Fire Detection” circuit opened (on the power board).
Error The obstacle has not returned to its closed position (the zero point).
Error No.201 Communication problem with the variable speed control.
Error No ___ Report for various variable speed control fau lts.
The error is reset by an “open” request or a “Fire Detection” command.