The informat ion conta ined in th is docu ment is the property of Automat ic Syst ems and is conf ident ial. The rec ip ient is forb idd en to use it for any purpose ot her
than for the use of the products or the exe cut ion of the project to wh ich th ey refer or to communicate it to th ird parties w ithout the pr ior wr itten conse nt of
Automat ic Systems. Document sub ject to change w ithout advance not if icat ion .
SL93x + TBV327-MT-EN
p. 28/40
Parameter
Range of
values
Default
value
Description
PUSH AND GO
No/Yes
No
"
No
": the motor drives the obstacle
immediately following an opening
request.
"
Yes
": An open request unlocks the
obstacle, the opening being then
realised by the user manually.
The obstacle locks again
automatically if it has not been
opened after 6 seconds (not
adjustable).
The “Memorise Card” parameter is
not active if "Push and Go" is set to
"Yes".
MEMORISE CARDS
0 to 5
0
With a turnstile (using the values 0
to 5):
Number of “open” requests saved
while the preceding movement is still
in progress. The stack of ”open”
requests in one direction is always
cleared before accepting ”open”
requests in the opposite direction.
With a swing gate (using the values
0 or 1):
Value 0: a new opening request in
the same direction while the obstacle
is closing causes a re-opening.
Note
: if re-opening is requested near
the closed position and if the speed
is too high, the obstacle may not
have the time to invert the movement
(because of its inertia) and locks
anyway.
Value 1: the same as for value 0 +
save and accept an “open” request
in the opposite direction to the
current movement without locking
the obstacle between the two
requests.
OPENING ANGLE
CLOCKWISE
0 to 180°
Accordi ng to the
"90°/rotati on"
para meter:
respectively
90°/ 120°
Fine adjustment of the maximum
opening angle in the clockwise
direction, selected at parameter
"90°/Rotative".
This adjustment may be necessary
according to obstacle’s height.
Note
: adjust the limit stops after
modifying this parameter (ch.5.7. ).
