The informat ion conta ined in th is docu ment is the property of Automat ic Syst ems and is conf ident ial. The rec ip ient is forb idd en to use it for any purpose ot her
than for the use of the products or the exe cut ion of the project to wh ich th ey refer or to communicate it to th ird parties w ithout the pr ior wr itten conse nt of
Automat ic Systems. Document sub ject to change w ithout advance not if icat ion .
SL93x + TBV327-MT-EN
p. 27/40
5.10. Control UNIT
The programmable control unit is the interface between the oper ator and the gate, allowing the
adjustment of all the parameters of the equipment.
Accessing the parameters:
Press OK (> 2 seconds) and relax to enter the menu (the gate unlocks).
Press the arrow keys (← →) to move from one parameter to another.
Press OK to select a parameter.
Press the arrow keys (← →) to change the value of the parameter.
Press OK to confirm the new value.
Parameter
Range of
values
Default
value
Description
YYY
Vxxx LLLLLLL
Main screen.
"YYY" = error message (see list p 33).
"Vxxx" = version of the program
installed on the equipment.
This manual refers to versions
V6.xx
.
"LLLLLLL " = language of the menu
(changed by the "Language"
parameter).
Press and hold OK when the
obstacle is locked to access the
parameters (= programming mode).
The gate is unlocked in programming
mode (and therefore out of service).
You must exit programming mode via
“Quit” menu.
QUIT
Leave programming mode and return
to the main screen by pressing OK.
90° OR ROTATING
90° / rotating
90°
Selection of the operating mode:
- 90°: opening angle of 90°,
- Rotating: opening angle of 120°
and locking of the obstacle
(for turnstiles TBV 327 only).
The "opening angles" and "HSP>LSP
angles" default values are
automatically adapted accordingly.
Note
: adjust the limit stops after
modifying this parameter (ch.5.7. ).
