Replacing Delivery Bin.
a. Locate lip on front edge of delivery bin, over lower edge
of opening in door and behind trim. Press down along
lip to make sure it is fully engaged between door and
trim.
b. Install the 4 screws and 2 brackets, to secure bin to
door.
11.
Coin Return.
The coin return lever is located on the
sliding panel and the coin return linkage is located above
the changer, scavenges the slug rejector. Actuation of the
coin return lever, will clear the rejector of any damaged
coin and will also cancel all credit on the changer,
returning that amount to the customer.
9
components
12. Coin Acceptance.
A coin or coins (5¢, 10¢ or 25¢) being
deposited, passes thru the rejecter and into their respec-
tive coin paths in the changer, establishing the credit.The
coins then enter either the self-load change tubes on the
changer or the cash box.Actuation of the coin return lever
prior to making a selection will cancel all credit on the
changer and will return the amount of deposit back to the
customer.
cleaning
The Snackshop LCM will do the best merchandising job for
you if it is kept clean.The display window can be cleaned with
any good glass cleaner. The exterior and interior surfaces
should be cleaned with warm water and mild detergent.Rinse
thoroughly and dry all surfaces.
The main product shelves can be best cleaned with the
spirals and product spacers removed. Refer to page 3 for
removal of spirals and page 4 for removal of the product
spacer.
Clean the acceptor on the changer frequently, accumulated
dirt in this area can cause coins to hang or not be accepted.
Follow recommended cleaning procedures as described by
the manufacturer.
CAUTION:
Do not use any cleaners containing silicon, as this
could cause electrical failures.
Summary of Contents for SNACKSHOP LCM5 Series
